Coastal Energy Florida solar, roofing and electrical contractor logo

Solar and Battery Backup for Fort Lauderdale's Canals and Coastal Towers

From a Rio Vista canal roof to a condo association board packet on A1A, Fort Lauderdale work runs through Broward's HVHZ code and often through someone else's board meeting first.

Tesla Energy

Certified Installer

FL Licensed

Solar + Roofing + Electrical

Veteran Owned

Florida business

Wide aerial of a coastal Fort Lauderdale, Florida estate with a newly installed roof

Straight answer

What Does a Fort Lauderdale Solar Project Cost?

Fort Lauderdale homes typically run $19,000 to $39,000 installed for an 8 kW to 14 kW system. Condo or high-rise projects vary by unit count and board scope, and we quote those separately after reviewing the building.

Serving utility
FPL
One to one net metering
Wind zone
170 - 181 mph HVHZ
Broward County High Velocity Hurricane Zone
Permitting
City of Fort Lauderdale / Broward Co.
NOA hardware required on every attachment
Drive time
About 35 minutes
From our Miami office on NW 67th St

Pricing shown is typical and a starting point. Your exact quote is confirmed after a site survey and depends on roof condition, electrical service, equipment choices and local permitting.

Get an accurate quote

Two building types, one county code

Canal Front Houses and Coastal Condo Towers Side by Side

Fort Lauderdale's solar demand splits between single family canal homes in neighborhoods like Rio Vista, Coral Ridge and Las Olas Isles, and condo or co-op towers along the beach corridor where a homeowner doesn't own the roof at all. Both sit inside Broward County's High Velocity Hurricane Zone, so racking hardware needs Notice of Acceptance documentation either way, but the approval path in front of it looks nothing alike.

A canal home goes through the City of Fort Lauderdale or Broward County building department. A condo unit owner first has to get in front of the association's board, which is a different conversation entirely.

Condo and association review

What a Fort Lauderdale Association Board Typically Asks For

We've sat through enough of these meetings to know what gets a project approved on the first pass.

Board requestWhat we provideWhy it matters
Roof loading and attachment detailEngineer-stamped structural letterBoards want proof the building's roof deck and common structure can carry the array.
Site plan showing unit boundariesMarked-up roof plan with the unit's allocated array areaClarifies which owner's system sits where on a shared roof.
Insurance and liability documentationCertificate of insurance naming the associationStandard requirement before any contractor works on common property.
Aesthetic or screening conditionsConduit routing plan kept off visible elevations where possibleFlorida Statute 163.04 limits an outright ban, but boards can still set reasonable placement rules.

We build the board packet before we file for the city or county permit, so both approvals move at the same time instead of stalling each other.

Marine air corrosion

Building for Salt Air That Comes Off the Ocean and the Canals

Fort Lauderdale properties get salt exposure from two directions at once: direct ocean air along the beach corridor, and brackish canal water on finger canal lots inland. Both accelerate corrosion on exposed fasteners, conduit and rooftop electrical enclosures faster than a standard mainland Florida install.

We spec marine grade stainless hardware and coated conduit fittings on Fort Lauderdale jobs as a standard practice, not an upgrade, and we check flood zone elevation before placing any ground level inverter or battery cabinet on a canal lot.

Tesla Powerwall Premier Installer credential held by Coastal Energy

Utility and load

FPL Net Metering and How Fort Lauderdale Homes Use Power

Pool Pump Load

Canal and coastal homes here run pool pumps nearly year round, which we account for using your trailing 12 month usage rather than square footage guesses.

Retail Rate Credits

FPL credits exported power at the retail rate under one to one net metering, rolling forward monthly with an annual true up.

Dock and Lift Station Equipment

Homes with seawall lighting or a lift station carry extra base load that a correctly sized system should offset.

Process

How a Fort Lauderdale HVHZ Install Actually Runs

Same sequence whether it's a canal home or a condo, with the board approval step added for shared-roof buildings.

  1. 01

    Site Visit and Load Review

    We walk the roof or the unit's allocated common area and pull 12 months of FPL usage.

  2. 02

    Board Packet (Condo Only)

    For shared-roof buildings, we prepare the structural letter, site plan and insurance documentation for board review.

  3. 03

    HVHZ Permit Submission

    NOA-compliant racking and flashing detail go to the City of Fort Lauderdale or Broward County.

  4. 04

    Install and Inspection

    Marine grade hardware throughout, then final inspection before FPL interconnection.

Local services

Services We Install in Fort Lauderdale

Every scope below is performed by Coastal Energy crews serving Fort Lauderdale, never handed to a subcontractor.

Fort Lauderdale Solar Installation

Full design, permitting and installation of owned rooftop solar, run by our own crews under license EC13013993.

Condo Solar Board Approval Fort Lauderdale

Drawings and load calculations prepared for condo and townhome boards reviewing a rooftop or garage install.

Answers

Frequently Asked Questions

Which Coastal Energy office covers Fort Lauderdale?

Fort Lauderdale work is run out of our Miami office at 7927 NW 67th St, Miami FL 33166. The same crew designs the system, pulls the Broward County permit and performs the install.

Is Fort Lauderdale in the High Velocity Hurricane Zone?

Yes, all of Broward County, including Fort Lauderdale, is HVHZ, which means racking hardware needs Notice of Acceptance documentation, the same standard used in Miami-Dade.

Does FPL offer net metering in Fort Lauderdale?

Yes, FPL credits exported solar at the retail rate under one to one net metering, with credits rolling forward monthly.

Can you replace my Fort Lauderdale roof and install solar in one project?

Yes. We hold Florida roofing license CCC1335978 and electrical license EC13013993, so a metal or tile reroof and the solar install run under one contract and one Broward County permit schedule. We do not install shingle roofs.

Can I install solar on a Fort Lauderdale condo or co-op roof?

It depends on the building and the association's rules, since the roof is common property. We prepare a board packet with structural detail, a site plan and insurance documentation before filing for a permit.

Does salt air affect solar equipment in Fort Lauderdale?

Yes, both direct ocean exposure along the beach corridor and brackish canal water inland accelerate corrosion, so we use marine grade stainless hardware and coated conduit fittings as standard here.

How does my HOA or condo board affect a Fort Lauderdale solar install?

Florida law limits how far a board can restrict solar, but reasonable placement and screening conditions are common, and we build the approval packet before filing for the building permit.

Keep reading

Related Pages

Get a Fort Lauderdale Solar Estimate

Send your address and a recent FPL bill for a real, HVHZ-compliant cost range.